2-channel input 2 channel output module for conversion from standard analog
signals, galvanically isolated and protected against incorrect measurements due
to parasitic voltages or ground loops, to ModbusRTU
Can be used for the conversion of standard unipolar voltage and current
signals
2 input
channels: 0...20mA, 4...20mA, 0...10V, 2...10V, 1...5V, 2...5V
2 input
channels: 0...20mA, 4...20mA, 0...10V, 2...10V, 1...5V, 2...5V
All parameters can be set through the Modbus RTU interface by means of mini
USB socket for programming placed on the front of the module
The software configuration, free from Drago website, for PC offers various
options and diagnostic functions
The more general settings can be set using the Dipswitches
The measured values can be read out via the Modbus RTU interface (RS485),
up to 247 measurement inputs in one Modbus segment
The insulation is 5-way 3 kV AC, 50 Hz, 1 min
The auxiliary power supply and the Modbus RTU can be connected through the
In-Rail-Bus connector on the back of the card
Module size:
6,2mm