The 4-channel DI/DO Modbus module with four functions Independently configurable inputs/outputs
The inputs can be used as a binary input, frequency or counter with three selectable input levels
The open collector outputs open can be used as binary, frequency, pulse, or PWM outputs
Functions: Code Track, Frequency: 0.1 Hz to 1 kHzMin
pulse time: 0.5 ms,Counter: 16 / 32 Bit
Outputs: Open collector Maximum voltage / current 32 V DC, 100 mA, residual voltage value < 1.5 V DC
Functions: Binary Code, Frequency: 0.1 Hz to 1 kHz, pulses: 1 to 60000 /min Min
pulse time: min. 0.3 ms, programmable, PWM: 10 to 90%
All the parameters can be set through the Modbus RTU interface by means of a mini USB socket for programming located on the front of the module
The free configuration software for PC offers various options and diagnostic functions
The most general settings can be set using the dipswitches
The measured values can be read out via the Modbus RTU interface (RS485), up to 247 measurement inputs in one segment Modbus
The insulation is 5-way 3 kV AC, 50 Hz, 1 min
The auxiliary power supply and the Modbus RTU can be connected through the In-Rail-Bus connector on the back of the card
Module size 6,2mm